Cut out a piece of cardboard. To make the pom pom for the sheep, you’ll need a cardboard rectangle to wrap your yarn around. For a large sheep, cut a piece that’s 3-inches by 5-inches (8-cm by 13-cm). For small sheep, cut a piece that’s 3-inches by 2-inches (8-cm by 5-cm). You can adjust the size of the cardboard to customize the size of sheep if you prefer. After you cut the cardboard, it’s a good idea to wrap it in packing tape. That will allow the yarn to slide off it more easily when you’re finished making the pom pom. Wrap the yarn around the cardboard. For the pom pom, you need fluffy white, cream, brown, or black yarn. Instead of cutting the yarn to a certain length, remove an end from the ball or skein and begin wrapping it around the cardboard widthwise. For a large sheep, wrap the yarn around the cardboard 120 times. For a small sheep, wrap the yarn around the cardboard 75 to 80 times. Use one hand to hold the end of the yarn in place as you wrap it side by side in a single layer on the cardboard. Once you’ve covered the cardboard, start creating a second layer over the first. Continue working until you’ve wrapped the yarn around the suggested number of

times. While white, cream, brown, or black yarn offers the most realistic sheep look, you can substitute your favorite color yarn, such as pink or blue. Bend the cardboard to slide off the yarn. When you’ve completely wrapped the cardboard with the yarn, use your fingers to bend the cardboard slightly widthwise to contract it. That makes it easier to carefully slide the yarn from the card. Be gentle as you pull the yarn from the cardboard and make sure to hold it together so it stays together. Tie twine around the middle of the yarn bundle. Once you’ve freed the yarn from the cardboard, use a piece of twine to secure the bundle in the middle. Tie the yarn as tightly as you can to ensure that it stays together. If you don’t have twine, you can substitute a piece of yarn. However, twine is stronger than yarn so it usually does a better job of holding the pom pom together. Cut the loops of the yarn to form the pom pom. When the yarn is securely tied with the twine, use a pair of scissors to cut the loops. This will create the pom pom shape for your sheep. After you cut the loops, you may need to trim some pieces to get the look that you want for your sheep. Draw the shape of the

sheep’s head on craft foam and cut it out. To make the sheep’s face, you’ll need a piece of black craft foam. Use a pencil or pen to draw the shape of the sheep’s head, complete with ears, on the foam as a guide. Next, carefully cut the head out with a pair of scissors.[1] X Research source If you’re not comfortable drawing the sheep’s head freehand, you can find templates online at various craft websites, such as Dad Can Do [1]. The proper size for sheep’s head will depend on how large your pom pom is. It should fit on one end of the pom pom. If you used dark yarn for the pom pom, use white craft foam for the head. You can use a craft knife to cut out the head if you prefer. Stick googly eyes on the head. Once you’ve cut out the sheep’s head, select two googly eyes that will fit on it side by side. Apply your favorite type of craft glue to the back of the eyes, and press them onto the foam head.[2] X Research source You can find googly eyes in a variety of sizes at the craft store. Make sure to let the glue dry for at least 5 minutes, so you can be sure the eyes won’t fall off when you begin to assemble the sheep. Fold two black pipe cleaners in half. For the

sheep’s legs, you’ll need two black pipe cleaners that are approximately 4- to 5-inches (10- to 13-cm) long. Bend the pipe cleaner in half to create a “V” shape.[3] X Research source Glue the head to the front of the sheep. Add a dab of glue to the back of the sheep’s head that you’ve made. Carefully press it onto your pom pom, and hold it for 30 to 60 seconds to ensure that it is secure.[4] X Research source You can use any type of glue to secure that works on fabric to secure the head to the pom pom. However, you may have an easier time if you use a hot glue gun. Thread the pipe cleaner front legs through the pom pom. Take one of the bent black pipe cleaners and push it through the pom pom on one side near the front. Make sure that the pipe cleaner is threaded through the yarn pom pom so it is secure.[5] X Research source Some thread may come loose when you thread the pipe cleaner through. You can trim any errant strands. Press the second pipe cleaner through the back of the pom pom. After you’ve secured the pipe cleaner for the front legs, push the second one through the pom pom near the back. Pull it through to the other side to create the second set of legs.[6] X

Research source Take care with your placement of the second pipe cleaner. You want to ensure that it’s far enough back from the first to provide proper balance for the sheep to stand. Adjust the pipe cleaners to allow the sheep to stand. Once both pipe cleaners are threaded through the pom pom, bend the four ends to create feet that help the sheep stand. You may need to adjust the length of the pipe cleaners on each side to ensure that the sheep is balanced properly.[7] X Research source